What's actually in your cup

what your cup is lined with.

Every Made to Disappear cup is a paper cup with a PHA lining, made from 100% certified home-compostable material, certified by TÜV Austria. Here's what that means, and how it compares to the other cups on the market.

A 16 oz paper hot cup, one on its side showing the mark on its base

every paper cup has a lining.

Paper on its own soaks up liquid, so every hot cup needs a thin barrier on the inside to hold your coffee. That lining decides what the cup is really made of, and what happens to it after.

Most cups use conventional plastic. Some use PLA. Some use a water-based coating. Ours uses PHA.

what is PHA?

PHA (polyhydroxyalkanoate) is a material made by microorganisms. They produce it naturally, as a way to store energy, when they’re fed renewable feedstocks.

The same kinds of microbes that make PHA can break it down. That’s why it works as a cup lining: it holds hot coffee like a plastic does, then composts in a garden pile when you’re done with it.

what you’re getting.

the cup
Paper with a PHA lining. That is the full material list.
the certificate
TÜV Austria, home compostable: tested to break down in a backyard pile, not just an industrial facility.
the lining
No petroleum plastic.
the sizes
Single-wall hot cups in 8, 12 and 16 oz.

how PHA compares.

The four linings you’ll see on paper cups today:

PHA (Made to Disappear)

Made from
Made by microorganisms from renewable feedstocks
Where it breaks down
Home compost (certified)
Good to know
Our cup is certified home-compostable by TÜV Austria

PLA

Made from
Plant sugars (often corn or sugarcane), fermented and processed into plastic
Where it breaks down
Industrial compost facilities
Good to know
Needs the high heat of a commercial facility, and many facilities don’t accept cups

Water-based coating

Made from
Varies. “Water-based” describes how it’s applied, not what it’s made of
Where it breaks down
Depends on the polymer
Good to know
Some are certified compostable, others are plastics designed for recycling. Ask what the polymer is

Conventional plastic (PE)

Made from
Petroleum
Where it breaks down
Doesn’t compost
Good to know
Recyclable only where facilities accept cups

PHA vs PLA.

Both are made from renewable sources, and both get called “compostable.” The difference is where.

PLA is made by fermenting plant sugars into lactic acid, then turning that into a plastic. It’s designed to break down in industrial composting, where piles run hot for weeks. In a backyard bin, or anywhere cooler, it breaks down very slowly. If your local facility doesn’t take compostable cups, a PLA cup usually isn’t composted at all.

PHA is made directly by microbes, and microbes break it down. Our cups are made from material certified to compost at home, so they don’t depend on a facility accepting them.

the full PHA vs PLA comparison, with sources

PHA vs water-based coatings.

“Water-based” sounds like it should mean natural, but it only describes the method. The polymer is dispersed in water, painted onto the paper, and dried. That polymer could be a compostable material or a conventional plastic.

Some water-based cups are certified compostable, and some aren’t. The only way to know is to ask what the lining is made of and check the certificate. With us, the answer is simple: PHA, made from certified home-compostable material.

the full PHA vs water-based comparison, with sources

after your coffee.

  1. 01

    home compost.

    Tear the cup into pieces and add it to your backyard compost with your food scraps. Smaller pieces break down faster.

  2. 02

    curbside food-scraps collection.

    Programs vary by city. Check what yours accepts before putting cups in.

  3. 03

    lids.

    Same material, same pile. The lid goes in with the cup.

how to compost it

two questions to ask any cup supplier.

Words like compostable, plant-based and water-based get used loosely. Two questions cut through it:

  1. 01

    What polymer is the lining made of?

  2. 02

    What does the certificate actually cover?

    Home or industrial composting, and the finished cup or just the material?

We answer both for you, every time.

see every certificate

questions.

Is PHA a plastic?

PHA is a biopolymer. It does the job of a plastic in the cup, holding hot liquid and sealing the seam, but it’s made by microbes and broken down by them.

Will it hold up to hot coffee?

Yes. These are hot cups, built for coffee and tea.

How long does it take to compost?

Home-compost certification requires the material to break down within 12 months in home-compost conditions. A warm, active pile works fastest.

Is it the same as a PLA cup?

No. PLA is designed for industrial composting. Our PHA-lined cup is made from material certified for home composting. See the comparison above.

Can I see the certificate?

Yes. Please email us and we’ll send them over.

try them in your café.

We send verified cafés free sample cups to test on their own bar. request a sample pack