Updated November 11, 2026 · By Made to Disappear
in short.
- PHA is the polymer bacteria store as an energy reserve. It is grown by fermentation and washed out of the cells; nothing is polymerised afterwards.
- Because microbes have always made and eaten it, the enzymes that digest PHA are common in soil, compost and water. PHB broke down in every soil and water condition tested in a 2018 fifteen-material comparison.
- It holds hot liquid, seals a cup seam and can be applied like any other lining. It costs more than PE or PLA, which is why most cups are not lined with it.
how PHA is made.
Many bacteria, when they have plenty of carbon to eat but are short of another nutrient such as nitrogen, convert the extra carbon into granules of polyhydroxyalkanoate and store them in the cell, the way animals store fat. The granules can reach most of the cell's dry weight. Industrial PHA production copies that: a culture is fed a carbon source (sugars, vegetable oils, methane or waste streams depending on the producer), then nutrient-limited so the cells fill with polymer. The cells are harvested, broken open and the polymer is separated and dried into pellets.
The polymer in the pellet is the polymer the cell made. That is the key contrast with PLA, where fermentation only produces a small molecule (lactic acid) and a chemical plant builds the polymer afterwards.
PHA is a family, not one material. The simplest member is PHB (polyhydroxybutyrate), which is stiff and crystalline. Co-polymers such as PHBV and PHBH add a second building block to make the material tougher and easier to process. Cup linings use grades tuned for heat sealing and flexibility.
why it breaks down where other plastics do not.
Biodegradation of a polymer needs an organism with an enzyme that can cut the chain. For most synthetic plastics no such organism exists in useful numbers, because the chemistry is new to biology. PHA is the opposite case: PHA-depolymerase enzymes are widespread in soil and water bacteria and fungi because PHA has been part of the microbial food web for as long as there have been bacteria.
The 2018 Environmental Science & Technology comparison of fifteen polymers and blends found PHB was one of only two materials, with thermoplastic starch, that broke down completely in all of the soil and water conditions tested, alongside the managed composting conditions. The 2020 Green Chemistry review of the PHA literature concluded that PHB and PHBV show biodegradation in every aerobic and anaerobic environment defined by the ASTM standards, and can be used to make products that are compostable and that break down in soil and water.
That is why a PHA-lined cup can be certified for home composting, which tests at garden temperatures over a longer window, rather than only for industrial composting at 58 °C. Home-compost certification asks the material to break down at the temperature of a garden pile, not the 58 °C of an industrial facility. TÜV Austria's OK compost HOME mark is the scheme the home-compost standards (AS 5810, NF T 51-800 and EN 17427) were written from.
is PHA a plastic?.
By the European Union's legal definition, yes. The Commission's Single-Use Plastics guidelines state that polymers produced by industrial fermentation, giving PHA as the example, are not natural polymers, because the polymerisation did not take place in nature. We think that is a fair line to draw and we do not argue with it.
What the definition does not capture is the ending. A PHA film in a compost pile is consumed. A polyethylene or acrylic film in the same pile is not. For a cup, the question that matters is not whether the lining is called a plastic but whether anything is left of it in the finished compost. For PHA, certified home compostable by TÜV Austria, the answer is no.
pHA as a hot-cup lining.
A lining has three jobs: keep liquid out of the board, survive the drink's temperature, and heat-seal the side seam and base. PHA does all three. The grades used for cups soften at a higher temperature than a hot coffee, and they seal on standard cup-forming machines.
It is more expensive than PE or PLA, both per kilogram and because volumes are smaller. That is the honest reason most cups are not lined with it, and the reason a PHA cup costs a few cents more.
Our cups are paper with a PHA lining and the lid is PHA, all made from 100% certified home-compostable material, certified by TÜV Austria. The certificates are on the certifications page.
questions.
What does PHA stand for?
Polyhydroxyalkanoate: a family of polyesters that bacteria make inside their cells as an energy store. PHB and PHBV are the most common members.
Is PHA home compostable?
PHA as a material breaks down in soil, water and compost at ambient temperatures. Whether a specific cup is home compostable depends on the whole cup being tested; ours are certified.
Is PHA made from petroleum?
No. It is grown by fermentation from carbon sources such as sugars, plant oils or methane, depending on the producer, and is the polymer as the cell made it.
Does PHA release microplastics?
Any lining can shed particles. A PHA particle is digested by the same microbes that break down the cup; a PE or PLA particle persists. That is the difference the microplastics question turns on.
Why don't all cups use PHA?
Cost and supply. PHA is newer at scale and costs more per kilogram than PE or PLA.
sources.
- Narancic, T. et al., Environmental Science & Technology 52(18), 2018. Fifteen polymers and blends tested in compost, soil, fresh water and seawater. doi.org/10.1021/acs.est.8b02963
- Meereboer, K. W., Misra, M. and Mohanty, A. K., Review of recent advances in the biodegradability of polyhydroxyalkanoate (PHA) bioplastics and their composites, Green Chemistry 22, 5519–5558, 2020. doi.org/10.1039/D0GC01647K
- European Commission, Commission guidelines on single-use plastic products in accordance with Directive (EU) 2019/904, Official Journal C 216, 7 June 2021. eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:52021XC0607(03)
- TÜV Austria, OK compost HOME certification mark: scope and the standards based on it (AS 5810, NF T 51-800, EN 17427). okcert.tuvaustria.com/ok-compost-home-en/
- TÜV Austria, Comparison of compostability standards (EN 13432, ISO 17088, ASTM D6400, AS 4736, ISO 18606), 2024. okcert.tuvaustria.com/wp-content/uploads/sites/76/2024/12/PD-BA-TABE-CERT-BIO-ID-415_comparison_standards_EN_2407.pdf
We cite standards, regulators, certifiers, peer-reviewed journals and manufacturers’ own technical pages. If you think we have something wrong, write to hello@madetodisappear.com and we will check it.
Everything we sell is made from 100% certified home-compostable material, certified by TÜV Austria. see the certificates.

